Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses

Electrochemical impedance spectroscopy allows the examination of corrosion susceptibility and resistance for different construction materials, in particular the determination of the properties of their passive films. This technique makes possible the analysis of electrochemical processes in time domain, including rapid phenomena such as changes in the properties of passive films, but it has never been used for passive layer cracking examination. In many cases, fracture of the passive film under tensile stresses leads to stress corrosion cracking. Therefore, investigations of passive layer cracking on austenitic stainless steels under tensile stresses facilitate the understanding of the mechanism of stress corrosion cracking in these common engineering materials. The effect of static tensile stresses on the passive film cracking behaviour of type 304L stainless steel immersed in 0.5 M NaCl solution at room temperature has been investigated. This paper presents the impedance spectra obtained for 304L stainless steel samples at different potential values.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Uranium association with corroding carbon steel surfaces

We investigated the association of uranium with clean and corroded surfaces of 1010 carbon steel. Studying steel contaminated by uranium species will have an important effect on the development of methods used to clean radioactively contaminated metal waste. X‐ray photoelectron spectroscopy, synchrotron infrared microspectroscopy and laboratory‐based Fourier transform infrared analysis of steel surfaces exposed to uranyl nitrate showed the presence of crystallized hydrated uranyl oxides, uranyl hydroxides, iron oxyhydroxides and iron oxides. In general, heavily corroded areas physically shield the uranium species, which tended to associate spatially with hydroxyl groups and lepidocrocite. Lightly corroded areas contained uranium species with stronger axial U–O bonding. Infrared spectroscopy, Rutherford backscattering spectroscopy and energy‐dispersive spectroscopy mapping analysis revealed that the uranium species are well distributed within the upper micron of the thick corrosion layer and associated more with areas of high hydroxide content. Parameters such as the concentration of uranyl nitrate solution used to expose the carbon steel coupons, the method of contamination (dipped or sprayed with dilute uranyl nitrate solution) and the degree of corrosion (accelerated corrosion before and/or after contamination) played significant roles in the distribution and nature of the uranyl hydroxide/iron oxyhydroxide corrosion products found on the surface of all coupons. These factors must be considered in the development and optimization of decontamination processes for metal waste. Copyright © 2003 John Wiley & Sons, Ltd.     

The first example of anodic corrosion of Pd in aqueous ethylenediamine with formation of colloidal palladium

For the first time, corrosion of a Pd anode was detected during electrolysis in a weakly alkaline aqueous solution of ethylenediamine. The kinetics and mechanism of the process were investigated by the methods of cyclic voltammetry and gravimetry. Scanning electron microscopy showed corrosion of the Pd anode and deposition of Pd on the cathode surface, while the formation of colloidal Pd in the working solution was identified by transmission electron microscopy.     

Coconut coir dust extract: a novel eco-friendly corrosion inhibitor for Al in HCl solutions

Abstract

Corrosion inhibition of aluminium in 1 M HCl by coconut coir dust extract (CCDE) was studied using weight loss and hydrogen evolution techniques at 30 and 60°C. It was found that the studied extract exhibits a very good performance as inhibitor for aluminium corrosion in 1 M HCl. Results show that the inhibition efficiency increases with increasing temperature and concentration of the extract. Inhibitive effect was afforded by adsorption of the extracts' components which was found to accord with Langmuir adsorption isotherm. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency and was further corroborated by the values of activation parameters obtained from the experimental data.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

Strong covalent bonding modulated graphene oxide/epoxy interfacial enhancement and advanced corrosion resistance

Abstract

Chemically functionalized graphene oxide [multi-amino functionalized graphene oxide (MAGO)] was achieved by building covalent bonds between graphene oxide (GO) and a small molecule containing benzene structure and multi-amino groups. Fourier transform infrared, X-ray diffraction, X-ray photo electron spectroscopy and TEM-EDX results certified that the molecule was successfully grafted onto GO nanosheets. Subsequently, functionalized GO was incorporated into waterborne epoxy (EP) coating through ball-milling method. This molecular design can significantly improve the dispersion of MAGO in EP matrix, as well as the compatibility and interaction between MAGO and EP. Compared with GO/EP, the water absorption of MAGO/EP decreased from 4.38 to 2.59%, the adhesion strength of MAGO/EP increased from 4.72 to 6.32?MPa after immersion of 40?days in 3.5% NaCl solution. Incorporation of 1?wt% of MAGO into EP matrix prominently improved the long-term corrosion resistance. The impedance modulus of GO/EP coating decreased by four orders after 40 days immersion, while that of MAGO/EP coating only decreased by one order. The impedance modulus was still 1.47?×?10⁸ Ω cm², and two-time constant wasn’t detected for MAGO/EP coating. This research developed a novel green anticorrosion coating with enhanced durability for metal protection.     

Evaluation of SARs for the prediction of skin irritation/corrosion potential–structural inclusion rules in the BfR decision support system†

The German Federal Institute for Risk Assessment (BfR) has developed a Decision Support System (DSS) to assess certain hazardous properties of pure chemicals, including skin and eye irritation/corrosion. The BfR–DSS is a rule-based system that could be used for the regulatory classification of chemicals in the European Union. The system is based on the combined use of two predictive approaches: exclusion rules based on physicochemical cut-off values to identify chemicals that do not exhibit a certain hazard (e.g., skin irritation/corrosion), and inclusion rules based on structural alerts to identify chemicals that do show a particular toxic potential. The aim of the present study was to evaluate the structural inclusion rules implemented in the BfR–DSS for the prediction of skin irritation and corrosion. The following assessments were performed: (a) a confirmation of the structural rules by rederiving them from the original training set (1358 substances), and (b) an external validation by using a test set of 200 chemicals not used in the derivation of the rules. It was found as a result that the test data set did not match the training set relative to the inclusion of structural alerts associated with skin irritation/corrosion, albeit some skin irritants were in the test set.     

Xanthione: A new and effective corrosion inhibitor for mild steel in sulphuric acid solution

The adsorption and inhibition effect of xanthione (XION) on mild steel in 0.5 M H₂SO₄ at 303–333 K were studied using gravimetric and UV–visible spectrophotometric methods. The results obtained show that XION acts as an effective corrosion inhibitor for mild steel in sulphuric acid and inhibition efficiency reaches 98.0% at a very low inhibitor concentration of 10 μM. Inhibition efficiency was found to increase with increase in XION concentration but decreased with temperature suggesting physical adsorption mechanism. Arrhenius law and its transition equation lead to estimate the activation parameters of the corrosion process. XION inhibits the corrosion of mild steel effectively at moderate temperature and adsorbs according to the Langmuir isotherm. Thermodynamic parameters governing the adsorption process have been calculated and discussed. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Attempt to correlate the molecular structure to quantum chemical indices was made using density functional theory (DFT).     

Protection of Copper Surface Against Corrosion by Cationic Surfactant in Seawater

The protection power of the cationic surfactant decylammonium acetate (DAA) in seawater has been studied to define the perfect conditions have to be found for using it as a corrosion inhibitor for copper surface. The adsorption isotherm of this surfactant on copper surface has been determined at different interval times at 30°C. The given isotherms have, in general, similar shapes exhibiting a Languimirian L-shape. The corrosion measurement has been determined according to weight loss method. The study declines that cationic DAA, in seawater, protects well the copper surface against corrosion when added with low concentrations, while high concentrations show bad inhibition efficiency. ICP spectroscopic analysis assures this result where high Cu% has been obtained in the presence of high DAA concentration.     

Corrosion inhibition of zinc in aqueous acidic media using a novel synthesized Schiff base – an experimental and theoretical study

Abstract

The kinetics of H₂ production during Zn corrosion in 0.5?M HCl without and with various additives of N,N'-bis-(1-hydroxyphenylimine)-2,5-thiophenedicarboxaldehyde (HPTD) was studied using gasometry and electrochemical techniques. The surface of the corroded Zn samples was investigated using SEM and Optical Profilometry. The rate of H₂ production (RHP) increased with the immersion time and temperature. Presence of HPTD mitigated RHP due to an adsorption process. The electrochemical impedance spectroscopy showed that HPTD had a good inhibitive effect. Polarization data proved that HPTD acted as a surface-active mixed-type inhibitor. Some thermodynamic parameters were deduced and discussed. Theoretical calculations were also conducted to corroborate the capability of HPTD to protect Zn surface from corrosion process.